Nvr70/70-R Series - Dahua NVR100 series User Manual

Power indicator
light
Record light
HDD abnormal
status indictor
light

2.1.12 NVR70/70-R Series

The front panel is shown as in Figure 2-14.
Please refer to the following sheet for front panel button information.
SN Name
Power button
1
System
2
Indicator light
Alarm indicator light
3
Network
4
light
USB2.0 port
5
16 HDD slot
6
POWER Power indicator light
1-16 It becomes on when system is recording.
It becomes on when there is no HDD, HDD error occurs, or HDD
HDD
is full.
Icon
HDD
indicator
-
Figure 2-14
Press it once to turn on the device.
Press it for a long time to turn off the device (Usually
we do not recommend).
Press power button for a long time or pull out the
power cable may result in device auto restart.
The blue light flashes when system is reading or
writing the system HDD.
In the system HDD, there are device important
configuration file, factory default configuration file,
device initial boot up data.
The alarm indicator light becomes on once an alarm
occurred. It becomes on via the software detection.
The alarm includes local alarm, no disk and etc.
The network indicator light is blue and it flashes when
you connect the device to the network.
Connect to USB2.0 storage device, mouse, USB
burner and etc.
/
Function
81