4Ks2/5424-24P-4Ks2 Series; Series; Nvr44/44-8P/44-16P/74/74-8P/74-16P/44-4K/54-4Ks2/54-16P-4Ks2/44-4Ks2/44 16P-4Ks2/5424-24P-4Ks2 Series - Dahua NVR100 series User Manual

Hide thumbs Also See for NVR100 series:

Table of Contents

Connect the HDD cable and power

3.4.5 NVR44/44-8P/44-16P/74/74-8P/74-16P/44-4K/54-4KS2/54-16P-4KS2/44-4KS2/44-

16P-4KS2/5424-24P-4KS2 Series

① Use the screwdriver to loose the screws of the rear

panel and then remove the front cover.

Connect to the HDD data cable to the main board

and the HDD port respectively. Loosen the power

cable of the chassis and connect another end of the

power cable to the HDD port.

3.4.6 NVR48/48-16P/NVR78/78-16P/48-4K/58-4KS2/58-16P-4KS2/48-4KS2/48-16P-4KS

The following figures are based on the NVR78 series.

Put the cover in accordance with

the clip and then fix the screws on the

rear panel and side panel.

② Put the HDD to the HDD bracket in the chassis

and then line up the four screws to the four holes

in the HDD. Use the screwdriver to fix the screws

firmly to secure HDD on the HDD bracket

After connect the cable, put the front cover back to

the device and then fix screws of the rear panel.