Dahua NVR100 series User Manual page 383

Step 5 Set security questions.
Note

After setting the security questions here, you can use the email you input here or answer the
security questions to reset admin password Refer to chapter 5.3 Reset password for detailed
information.

Cancel the email or security questions box and then click Next button to skip this step.

Email: Input an email address for reset password purpose. Scan the QR code to reset the
password, you need to receive the security code by the email. Input the security code to reset
the password of admin. In case you have not input email address here or you need to update
the email information, please go to the main Setup->System->Account to set. Refer to chapter
5.10.5.7 for detailed information.

Security question: Set security questions and corresponding answers. Properly answer the
questions to reset admin password. In case you have not input security question here or you
need to update
menu->Setting->System->Account->Security question to set. Refer to chapter 4.10.1.1.5
Security question for detailed information.
Note
If you want to reset password by answering security questions, please go to the local menu
interface.
Step 6 Click OK to complete the device initialization setup. See Figure 5-3.
Figure 5-2
the security question information, please go to the main
373