Duration: System can generate an alarm once the object is in the zone for the specified period.
Sensitivity: It is to set alarm sensitivity. The value ranges from 1 to 10.The default setup is 5.
Click
to draw the rule.
Click OK to complete the rule setup.
For detailed setups, please refer to chapter 5.10.3.1.1 motion detect for detailed information.
5.10.3.2.1.7
From main menu->Setup->Event-> Behavior analytics->Behavior analytics, click
type as fast moving, you can see the following interface. See Figure 2-25.
Sensitivity: It is to set alarm sensitivity. The value ranges from 1 to 10.The default setup is 5.
Figure 5-83
Fast moving
, and then select rule
429