you can see the remaining login attempts.
Refer to chapter 4.7.11 (Main menu->Setting->Event->Abnormality->User) to set login
attempt times (1-10) and account lock time (1 to 30 minutes).
Step 4
Click OK button.
Device goes to startup wizard, now you can quickly configure the device.
4.1.4.1 Smart Add
When the network camera(s) and the device are in the same router or switch, you can use smart add
function to add network cameras to the device.
Please follow the steps listed below.
Step 1
There are two ways to go to the smart add interface. See Figure 4-15.
From the startup wizard, click Smart add button and then click Next. See Figure 4-13.
On the preview interface, right click mouse and then select Smart add. See Figure 4-14.
Figure 4-13
182