Dahua NVR100 series User Manual page 455

The interface is shown as in Figure 5-107.
Please refer to the following sheet for detailed information.
Parameter
Channel
Status
Schedule
Manual
Stop
Start all/
stop all
5.10.4.4 RAID Manager
Figure 5-107
Function
Here you can view channel number.
The number displayed here is the max channel amount of your
device.
There are three statuses: schedule, manual and stop.
System enables auto record function as you set in record schedule
setup (general, motion detect and alarm).
It has the highest priority.
Enable corresponding channel to record no matter what period
applied in the record setup.
Stop current channel record no matter what period applied in the
record setup.
Check the corresponding All button, you can enable or disable all
channels record.
445