Dahua NVR100 series User Manual page 459

Hide thumbs Also See for NVR100 series:

Table of Contents

Please refer to the following sheet for detailed information.

5.10.5.1.2 Date and time

The date and time interface is shown as in Figure 5-114

Figure 5-113

It is to set device name.

It is device channel number.

You can select the language from the dropdown list.

Please note the device needs to reboot to get the modification

This is to display video standard such as PAL.

Here is for you to select working mode when current HDD is full while

the next HDD is not empty. There are two options: stop recording or

rewrite old files.

Here is for you to specify record duration. The value ranges from 1 to

120 minutes. Default value is 60 minutes.