Dahua NVR100 series User Manual page 277


Video matrix Check the box here to enable this function. When an alarm occurs, SPOT OUT port
displays device video output. It displays video (1-window tour) from alarm activation channel you
select at the Record channel item.

Buzzer: Highlight the icon to enable this function. The buzzer beeps when alarm occurs.
Please highlight icon
button, system goes back to the previous menu.
Note:
In motion detection mode, you cannot use copy/paste to set channel setup since the video in each
channel may not be the same.
In Figure 4-113, you can left click mouse and then drag it to set a region for motion detection. Click Fn to
switch between arm/withdraw motion detection. After setting, click enter button to exit.
to select the corresponding function. After all the setups please click save
Figure 4-112
Figure 4-113
267