Dahua NVR100 series User Manual page 395

Hide thumbs Also See for NVR100 series:

Table of Contents

Please refer to the following sheet for parameter information.

Manufacturer

There are two connection types. You can use the network to

connect to the camera or use the WIFI. The

current network camera connection mode is general; the

means current network camera mode is hotspot.

Select a device in the Added device list and then click Delete

button, system can disconnect the device and remove it from the

Added device list.

Click it, the interface is shown as in Figure 5-23. Here you can

add network camera manually.

You can select a channel from the dropdown list (Here only

shows disconnection channel.)

Please select from the dropdown list.

Different series products may support different manufacturers, please refer

to the actual product.

Input remote device IP address.