Dahua NVR100 series User Manual page 205

Step 3 Tap at the top left corner, you can see the main menu.
Step 4 Tap Device manager button, you can use several modes (P2P/DDNS/IP and etc.) to add the
device. Click
the connected device. See Figure 4-27.
Step 5 Click Start live preview to view real-time video.
4.1.4.5 Registration
Here you can add network camera, change network camera IP address and etc.
Step 1 Click Next button.
Enter remote device interface. See Figure 4-28.
Note
There are two ways to go to Registration interface.

From main menu->Setting->Camera->Registration, you can go to the registration interface.

On the preview interface, right click mouse and then select Registration.
to save current setup. Tap Start Live preview to view all-channel video from
Figure 4-27
195