Remote Device Initialization - Dahua NVR100 series User Manual

Step 2 Select the import file and then click the OK button. System pops up a dialogue box to remind you
successfully imported.
Step 3 Click OK button to exit.
Note
If the imported IP has conflicted with current added device, system pops up a dialogue box to
remind you. You have two options:
Step 4 Click OK button, system uses the imported setup to overlay current one.
Important

You can edit the exported .CVS file. Do not change the file format; otherwise it may result in
import failure.

Does not support customized protocol import and export.

The import and export device shall have the same language format.

4.2.2 Remote Device Initialization

Remote device initialization can change remote device login password and IP address.
Note

When connect a camera to the device via PoE port, device automatically initialize the camera. The
camera adopts device current password and email information by default.

When connect a camera to the device via PoE port, the device may failed to initialize the camera.
Please go to the Registration interface to initialize the camera.
Step 1 From main menu->Setting->Camera->Registration.
Enter Registration interface.
Figure 4-44
208