Dahua NVR100 series User Manual page 196

4) Device pops up following dialog box after it successfully added network cameras. See
Figure 4-19.
Step 4 Click YES button to complete smart add operation.
4.1.4.2 General
After you successfully logged in the startup wizard, device goes to General interface. Here you can set
NVR basic information.
4.1.4.2.1 General
It is to set device basic information such as device name, serial number and etc.
Please follow the steps listed below.
Step 1 Click General button.
The interface is shown as below. See Figure 4-20.
Note
From Main menu->Setting->System->General->General, you can go to the general
interface.
Step 2 Set parameters.

Device ID: Please input a corresponding device name here.

Device No: When you are using one remote control (not included in the accessory bag) to
control several NVRs, you can give a name to each NVR for your management.

Language: System supports various languages: Chinese (simplified), Chinese (Traditional),
English, Italian, Japanese, French, Spanish (All languages listed here are optional. Slight
difference maybe found in various series.)

Video standard: There are two formats: NTSC and PAL.

HDD full: Here is for you to select working mode when hard disk is full. There are two
options: stop recording or rewrite old files.

Pack duration: Here is for you to specify record duration. The value ranges from 1 to 120
minutes. Default value is 60 minutes.

Realtime play: It is to set playback time you can view in the preview interface. The value
ranges from 5 to 60 minutes.

Auto logout: Here is for you to set auto logout interval once login user remains inactive for a
specified time. Value ranges from 0 to 60 minutes.
Figure 4-19
186