Dahua NVR100 series User Manual page 200

Step 3 Set holiday name, repeat mode and holiday mode.
Note
Click Add more to add new holiday information.
Step 4 Click Add button, you can add current holiday to the list.
Note

Click the dropdown list of the state; you can enable/disable holiday date.

Click
Step 5 Click Apply button to save settings.
4.1.4.3 Basic Network Settings
Set device IP address, DNS information so that the device can connect to other devices.
Preparation
Make sure the device has properly connected to the network.
Step 1 Click Next button, device goes to TCP/IP interface. See Figure 4-24.
Note

From Main menu->Setting->Network->TCP/IP, you can go to the TCP/IP interface.

Different series products have different Ethernet adapter amount and type. Please refer to
the actual product.
to change the holiday information. Click
Figure 4-23
to delete current date.
190