Dahua NVR100 series User Manual page 353

User group and User
The account adopts two-level management mechanism. The group name and user name shall be unique.

The default user amount is 64 and the default group amount is 20.

The factory default user group includes: user and admin. These two groups cannot be deleted.

Change the group authorities to change the user rights in the same group. The authorities of user
admin and 888888 are ready-only.

Each user shall only belong to one group. The user authorizes shall be equal to or lower than its
group authorities.

For the user account name and the user group, the string length ranges from 1 to 31-byte. The string
includes the letter, number, underline, and connector.
After all the setups please click save button.
4.10.1.1.1 Add User
Click modify user button
Please input the user name, password, select the group it belongs to from the dropdown list.
Then you can check the corresponding rights for current user.
For convenient user management, usually we recommend the general user right is lower than the admin
account.
Figure 4-201
in Figure 4-201 , the interface is shown as in Figure 4-202.
343