Playback Image; Splice Playback - Dahua NVR100 series User Manual


Modify
Double click one mark information item, you can see system pops up a dialogue box for you to change
mark information. You can only change mark name here.

Delete
Here you can check the mark information item you want to delete and then click Delete button, you can
remove one mark item. .
Note

After you go to the mark management interface, system needs to pause current playback. System
resume playback after you exit mark management interface.

If the mark file you want to playback has been removed, system begins playback from the first file in
the list.

4.6.5 Playback Image

Here you can search and play the image. Please follow the steps listed below.
1) From main menu->Search, or on the preview window right click mouse and then click Search, you
can go to the search interface.
2) At the top right corner, select image and then input playback interval.
Select date and channel, click
3)

4.6.6 Splice Playback

For the large record file, you can use splice playback function to play the same file in several sections at
the same time. It is very convenient for you to find the video footages you desire.
On the main menu, click Search button, or right click mouse and then select Search. You can go to Figure
4-96 or Figure 4-97
On the right pane, check the box to enable splice playback function, and then set channel, date, split
mode. The splice playback interface is shown as below. Each section has a small triangle; you can adjust
it to
Figure 4-102
to play.
set time. See Figure 4-103.
257