Dahua NVR100 series User Manual page 197


Monitor channels when logout: Here you can set channels you want to view when your
account has logged out. Click the button and then cancel the channel name box, you need
to login to view the corresponding video. The channel window displays
interface.

Navigation bar: Check the box here, system displays the navigation bar on the interface.

IPC Time Sync: You can input an interval here to synchronize the NVR time and IPC time.

Startup wizard: Once you check the box here, system will go to the startup wizard directly
when the system restarts the next time. Otherwise, it will go to the login interface.

Mouse sensitivity: You can set double click speed via dragging the slide bard. You can Click
Default button to restore default setup.
Step 3 Click Apply button to save settings.
4.1.4.2.2 Date and Time
Here you can set device time. You can enable NTP function so that the device can sync time with the
NTP.
Step 1 Click Date and time button. See Figure 4-21.
Figure 4-20
in preview
187