Nvr42/42N/42-P/42-8P/42-16P/72/72-8P/42-4K/42-8P-4K/52-4Ks2/52-8P-4Ks2/52; 4Ks2/22-S2/22-P-S2/22-8P-S2/42-4Ks2/42-P-4Ks2/42-8P-4Ks2/42-16P-4Ks2/5224- 24P-4Ks2 Series - Dahua NVR100 series User Manual

○
1
. Loosen the screws of the upper
cover and side panel.
○
4
Place the HDD in accordance
with the four holes on the bottom of
the chassis.

3.4.4 NVR42/42N/42-P/42-8P/42-16P/72/72-8P/42-4K/42-8P-4K/52-4KS2/52-8P-4KS2/52

-16P-4KS2/22-S2/22-P-S2/22-8P-S2/42-4KS2/42-P-4KS2/42-8P-4KS2/42-16P-4KS
2/5224-24P-4KS2 Series
The following figures are based on the NVR 72-8P series.
○ 1
Loosen the screws of the rear
panel and side panel.
○
2
Connect the one end of the
HDD data cable and the power
cable to the mainboard.
○
5
Turn the device upside down;
fix the screws to secure the HDD
on the bottom of the chassis.
②
Place the HDD in accordance with
the four holes in the bottom.
○
3
Connect the other end of the
HDD data cable and the power
cable to the HDD.
○
6
Put the cover in accordance
with the clip and then fix the
screws on the rear panel and side
panel.
③
Turn the device upside down and
then secure the screws firmly. It is to
fix the HDD on the chassis.
144