3.3.4 NVR42/42N/42-P/42-8P/42-16P/72/72-8P/42-4K/42-8P-4K/52-4KS2/52-8P-4KS2/52
-16P-4KS2/22-S2/22-P-S2/22-8P-S2/42-4KS2/42-P-4KS2/42-8P-4KS2/42-16P-4KS
2 Series
The following figures are based on the NVR 72-8P series.
○ 1
Loosen the screws of the upper
cover and side panel.
④
Turn the device upside down and
then turn the screws in firmly.
⑦
Put the cover in accordance with
the clip and then place the upper cover
back.
3.3.5 NVR44/44-8P/44-16P/74/74-8P/74-16P/44-4K/54-4KS2/54-16P-4KS2/44-4KS2/44-
16P-4KS2 Series
②
Fix four screws in the HDD (Turn
just three rounds).
⑤
Fix the HDD firmly.
⑧
Secure the screws in the rear panel
and the side panel.
③
Place the HDD in accordance with
the four holes in the bottom.
⑥
Connect the HDD cable and power
cable.
136