Show User; Set User - Symmetricom TimeCreator 1000 User Manual

Show User

This command displays all assigned users and access levels.
Note: Users logged in remotely via RADIUS or TACACS+ will be
displayed as <username> (remote), rather than just <username> for
local users.
Command Syntax:
show user
Example:
tc1000>show user
Response:
Name
Access Level
Lock State
Name
Access Level
Lock State
Name
Access Level
-Lock State
Related:

set user

Level : Admin only
Set User
Use this command to provision the local user password and access level.
Command Syntax:
Use this command to add a new user. The system prompts the Administrator for

username, password, password verification and level of access. A maximum of
30 users can be specified.
set user add
Use this command to delete a user from the access list.

set user del <username>
097-93100-01 Revision C – February, 2010
Appendix B Command Descriptions and Communications Interface
- admin
- admin
- unlock
- bobo
- user
- unlock
- juan (remote)
- user
- unlock
CLI Commands
TimeCreator 1000 User's Guide 265