Show Ntp - Symmetricom TimeCreator 1000 User Manual

Appendix B Command Descriptions and Communications Interface
CLI Commands

Show NTP

This command displays the NTP configuration, including server addresses, polling
intervals, preferred server, and key information.
Command Syntax:
show ntp
Example:
tc1000>show mode
Response:
NTP Authentication: Disabled
NTP configuration:
Servers: (*: Prefer server)
NTP Query:
remote
==============================================================================
SYMM_TE(0)
192.168.83.180
*192.168.3.98
Level : User, Power-User and Admin
232 TimeCreator 1000 User's Guide
127.127.45.0 minpoll 4 maxpoll 6
192.168.83.180
192.168.3.98 *
refid st t
.GPS. 0 l
.STEP. 16 u
192.168.10.44 2 u
when poll reach delay
- 16 0 0.000
- 1024 0 0.000
845 1024 377 1.292
097-93100-01 Revision C – February, 2010
offset jitter
0.000 0.015
0.000 0.000
0.048 0.207