Symmetricom TimeCreator 1000 User Manual page 191

Show Cable Advance
This command displays the cable advance setting for all enabled DTI outputs.
Command Syntax:
show cable-adv
Example:
tc1000>show cable-adv
Remarks: The cable advance value may not be updated if the cable is
disconnected or the port is disabled, including manual cable advance values.
Related:
set cable-adv
Level : User, Power-User and Admin
Set Cable Advance
Use this command to provision DTI client and server link(s) to use the specified
cable advance value.
Command Syntax:
set cable-adv {port# | all} {auto | manual<value>}
Example 1:
To set the cable advance for all ports to auto -
tc1000>set cable-adv all auto
097-93100-01 Revision C – February, 2010
Appendix B Command Descriptions and Communications Interface
CLI Commands
TimeCreator 1000 User's Guide 191