Appendix C Installing the Two-Way GPS Antenna
Making GPS Connections
Figure C-3.
Installing the Antenna Bracket on a Pipe
– If you are mounting the bracket to a wood post, assemble as shown in
Figure
positioned mounting bracket slots, and attach to the post.
Figure C-4.
Installing the Antenna Bracket on a Post
2. Mount the antenna and mast assembly to the "L" bracket.
3. Connect the mast to the flange using PVC glue.
4. Feed an RG58 (060-58545-xx) cable through the bottom of the mast as
illustrated. See
5. Connect the cable to the antenna "pigtail" and pull the cable back through the
mast.
278 TimeCreator 1000 User's Guide
C-4. Install the provided two self-tapping screws in two diagonally
Table C-1
for specific cable lengths.
097-93100-01 Revision C – February, 2010