Appendix B Command Descriptions and Communications Interface
CLI Commands
Show Services
This command displays all TimeCreator 1000 service states.
Command Syntax:
show services
Example:
tc1000>show services
Reponse:
Service States:
eia-232
telnet
ssh
ntp
snmp
syslog
Remarks: Services include EIA-232, Telnet, SSH, NTP, Syslog, and SNMP.
Level :
User, Power-User and Admin
Set Service
Use this command to specify the state of each service.
Command Syntax:
To provision the state of EIA-232:
set service eia-232 {enable|disable}
To provision the state of Telnet:
set service telnet {enable|disable}
To provision the state of SSH:
set service ssh {enable|disable}
To provision the state of NTP:
set service ntp {enable|disable}
250 TimeCreator 1000 User's Guide
- enable
- enable
- enable
- enable
- enable
- enable
097-93100-01 Revision C – February, 2010