Routine Operation Commands; Displaying Alarms; Displaying Events - Symmetricom TimeCreator 1000 User Manual

Summary for the GPS Input

Number of standing system alarms

Currently selected TOD Source

System date and time

Uptime for the IMC

Clock operating mode for the IOC

Assigned asset tag

To display the system status, enter the following:
Type
show status

Routine Operation Commands

This section describes the commands you use to perform the following routine
operations with the TimeCreator 1000:

Displaying alarms



Displaying events


Restarting the server IMC card

Displaying Alarms
The Show Log Alarm command displays some of the local alarms in the alarm log in
chronological order (first in - first out). This command also allows the user to display
a specified number of alarms from the beginning or end of the log file.
Example
Type
show log alarm
Displaying Events
The Show Log Event command displays some of the local events in the event log in
chronological order (first in - first out). The event log contains the 1000 most recent
alarmed and non-alarmed events. This command also allows the user to display a
specified number of alarms from the beginning or end of the log file.
Example
Type
show log event
097-93100-01 Revision C – February, 2010
and press Enter.
and press Enter.
and press Enter.
Chapter 5 Provisioning
Routine Operation Commands
TimeCreator 1000 User's Guide 109