Symmetricom TimeCreator 1000 User Manual page 228

Appendix B Command Descriptions and Communications Interface
CLI Commands
Show Log-Interval
This command displays the user provisioned log intervals.
Command Syntax:
show log-interval
Example:
To display the intervals of the perfromance log -
tc1000>show log-interval
Response:
Performance
Related:
show log
Level : User, Power-User and Admin
Set Log-Interval
Use this command to provision the interval for the specified log. The interval is the
time, in seconds, between successive log entries. Only the performance log can be
provisioned.
Command Syntax:
set log-interval performance {interval}
Example:
To set the interval between successive log entries for the perfromance log to a value
of 75 seconds -
tc1000>set log-interval performance 75
Remarks: Setting the log interval to zero disables logging. The range is 10 - 86,400.
Related:
show log
Level : Power-User and Admin only
228 TimeCreator 1000 User's Guide
- 60
097-93100-01 Revision C – February, 2010