SV61162 Rev. C
DM800™ Series Digital Mailing System Operating Guide
If You Need To Change Your System Setup
Place a check mark in the Done box when you complete the topic.
How to do the following:
Change the date on your
DM Series™ System.
Set up a new scale or change
settings on an existing scale,
including:
•
adjust for the scales
environment.
•
set your system to
automatically recognize
the scale.
•
set up to use differential
weighing.
•
set up to clear or retain
the class value when you
add a new weight on the
scale.
•
set up to clear or retain
the ZIP or Zone value
when you add a new
weight on the scale.
•
set up to clear or retain
the ZIP or Zone value
when the class changes.
•
set up to prompt the
operator for a ZIP Code
or Zone.
•
set up a group of ZIP
Codes for a bulk mailing
center.
•
add ZIP Codes to a Zone
0 rate.
Set the value at which you
are warned that you are
running low on funds in your
meter.
Set the value at which you
are warned that you are run-
ning low on ink for printing
your postage.
Refer to Chapter and Section
Chapter 5, Setting the Date and
Time of Day
Chapter 5, Setting Up the Scale
and Selecting Rates
Chapter 5, Scales/Rates: Attached
Scale
Chapter 5, Scales/Rates: Auto-
scale
Chapter 5, Scales/Rates: Diff
Weigh Trip Weight
Chapter 5, Scales/Rates: Class if
New Piece
Chapter 5, Scales/Rates: Destina-
tion if New Piece
Chapter 5, Scales/Rates: Destina-
tion if New Class
Chapter 5, Scales/Rates: ZIP/Zone
Prompt
Chapter 5, Scales/Rates: BMC
Intra ZIP
Chapter 5, Scales/Rates: Add ZIPs
to Zone 0
Chapter 5, Configuring High/Low
Funds Warnings
Chapter 5, Configuring Low Ink
Warning
Page
Done
5-5
5-8
5-8
5-9
5-9
5-9
5-10
5-10
5-10
5-11
5-11
5-17
5-17
B-5