Changing The Printhead - Pitney Bowes DM800 Series Operator's Manual

Replacing the
Ink Cartridge
continued
Changing the
Printhead
SV61162 Rev. C
DM800™ Series Digital Mailing System Operating Guide
4. Insert the ink cartridge
with the grooved side
facing you.
5. Close the ink cartridge
lid and push down until
it locks into place.
6. Close the main cover.
7. Print a test pattern to
verify that you have in-
stalled the ink cartridge
correctly (see Printing
a Test Pattern in this
chapter).
If you have cleaned the printer nozzle and changed the print cartridge and
the meter stamp is still not satisfactory, replace the printhead.
CAUTION: Do NOT attempt to clean the printhead.
Instructions for replacing the printhead are included with each replacement
and are repeated here for your convenience.
1. Press the Menu key.
2. Select Maintenance.
3. Select Replace Printhead. The "Printhead Warning - Continue?"
screen appears. Read this screen carefully since once you agree to
continue, you cannot cancel the process.
4. Once you verify that you have a replacement printhead, select Yes,
continue from the screen. The "Replace Printhead" screen appears.
5. Open the main cover and locate the printhead tab.
Printhead tab
9-13