What You Need To Know; Safety Requirements - Pitney Bowes DM800 Series Operator's Manual

Pitney bowes inc. postal equipment user manual
Hide thumbs Also See for DM800 Series:
Table of Contents

Advertisement

1 • Read this First
What You Need
to Know
Safety
Requirements
1-4
Since your postage meter (Postal Security Device) is licensed by the
United States Postal Service (USPS), you must follow a few basic require-
ments.
USPS Requirements
Mail must have the correct date and postage amount in the meter
stamp.
Metered mail must bear the ZIP Code location of the post office where
the postage meter (Postal Security Device) is registered.
If you move to another ZIP Code location, you must update the ZIP
Code. You can do this by calling your local Pitney Bowes district office.
Each time you refill your postage meter (Postal Security Device)
through the modem, the Postage By Phone
computer automatically performs a postal inspection. If the postage
meter in your mailing machine has not detected a modem refill transac-
tion at certain intervals, the message "Inspection Required" appears
on the main screen of the IntelliLink® Control Center. (The system will
then prompt you to connect to Pitney Bowes and perform an inspec-
tion.)
The postage tape you use must meet USPS specifications.
WARNING! Follow normal safety precautions for all office equip-
ment whenever using the DM800™ Series Digital Mailing System.
Read all instructions before you attempt to operate the machine.
Use the equipment only for its intended purpose.
Place the machine near an easily accessible power outlet. Avoid us-
ing outlets controlled by wall switches or shared by other equipment.
Plug the machine into a properly grounded power outlet. DO NOT re-
move the power cord's ground pin and DO NOT use a ground adapter.
Make sure the area in front of the power outlet is free of obstruction.
Turn the machine off using the power switch (for the location, refer to
Chapter 2, page 2-6) and NOT from a power strip.
Do not place lighted candles, cigarettes, cigars, etc. on the machine.
DO NOT route the power cord over sharp edges or trap it between
pieces of furniture. Make sure there is no strain on it.
Meter Payment System
®
SV61162 Rev. C

Advertisement

Table of Contents
loading

Table of Contents