Important Information About Powering Your Dm Series™ Digital Mailing System Off; Sv61162 Rev. C - Pitney Bowes DM800 Series Operator's Manual

DM800™ Series Digital Mailing System Operating Guide
Important Information About Powering Your
DM Series™ Digital Mailing System Off
Your DM Series™ Digital Mailing System is designed to remain powered
on at all times. This is necessary so that the printer station can perform the
required maintenance it needs to maintain peak performance.
Your DM Series™ System has a power switch (for the location, refer to
Chapter 2, page 2-6) so that you can properly remove power to the sys-
tem.
If you need to power off your system, you must use the power switch.
When you power off the system, the system immediately moves the
printhead back to the capping station to keep the printhead from drying
out.
Powering off your system by any other means, such as a wall switch, a
power strip, or unplugging from a wall outlet, will result in higher than nor-
mal ink consumption and could damage your mailing system.
NO NO NO
YES

SV61162 Rev. C

1-9