Using The Account Setup Procedures; Before Using The Setup Procedures - Pitney Bowes DM800 Series Operator's Manual

7 • Accounting Setup
Using the
Account Setup
Procedures
Before Using
the Setup
Procedures
7-4
The following is a list of all the account setup procedures. For details on
each procedure, refer to the section number listed here.
Viewing Accounts or Subaccounts.
1
Creating Accounts and Subaccounts.
2
Editing Accounts.
3
Setting an Accounting Period.
4
Turning Accounting On or Off.
5
Deleting Accounts.
6
Turning Account Password Protection On or Off.
7
Resetting (Clearing) All Accounts.
8
Turning Reset Individual Accounts On of Off.
9
Transferring Funds.
10
Setting the Station ID.
11
Selecting an Accounting Type.
12
1. If your system has a supervisor password set up, you must enter that
password before you can enter the account setup mode.
NOTE: Passwords are case-sensitive.
2. If you have not set up any accounts yet, as soon as you press the
Accounts key on the control center, the system prompts you for the
supervisor password. As soon as you enter the password, the system
displays the "Set Up Accounts" screen.
3. If you have already set up accounts, pressing the Accounts key dis-
plays a list of all the accounts. Press the right arrow key to enter the
"Set Up Accounts" screen.
SV61162 Rev. C