Pitney Bowes DM800 Series Operator's Manual page 147

SV61162 Rev. C
DM800™ Series Digital Mailing System Operating Guide
Tape is still on roll
1. When you see the red stripe on the tape, go to the Tape Maintenance
screen:
a.) Press the Menu key.
b.) Select Maintenance.
c.) Select Load Tape.
d.) Select Unload Tape.
2. If your DM800i™ Digital Mailing System does not have the optional
WOW™ module, open the feed cover and remove the tape roll.
If your DM800i™ Digital Mailing System has the optional
WEIGH-ON-THE-WAY™ (WOW™) module, open the WOW™ cover.
Refer to the appropriate figure below.
Location of tape roll
under the feed cover on
DM800i™ system without
optional WOW™ module
Location of tape roll
under the WOW™ cover
on DM800i™ system with
optional WOW™ module
DM800i™ Digital Mailing System
DM800i™ Digital Mailing System with optional WOW™ module
9-3