Table of Contents
Advertisement
Initialise
Instrument
m1000™ Operating Manual Addendum, 392813, en, V1.1
During initialization of the m1000™, all installed subassemblies are moved to their
initial positions.
The PosID and LiHa will move to the left side.
The RoMa will move to the right side.
1
Close the Safety door.
2
Start the GENESIS Setup & Service software by clicking on the
TECAN icon.
3
From the GENESIS Setup & Service main screen, select System from the
menu bar.
4
Select Initialise Instrument from the System menu.
Instrument initialization begins and the following message appears:
5
Once Initialization is complete, the GENESIS Setup & Service main screen
is displayed.
29
Advertisement
Table of Contents
Need help?
Do you have a question about the M1000 and is the answer not in the manual?
Questions and answers