Replacing The Front Bezel; Procedure; Post-Requisites - Alienware Area-51 R3 Threadripper Edition Service Manual

Replacing the front bezel

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Align the tabs from inside the chassis on the right and left side and place the
front bezel and snap it in place.
2 Connect the top tron light-cables to the front bezel.
3 Connect the bottom tron light-cables to the front bezel.
4 Replace the screw (6-32x5.2) from inside, securing the front bezel to the
right side of the chassis.
5 Replace the two screws (6-32x5.2) from inside, securing the front bezel to
the left side of the chassis.
6 Replace the four screws (#6-32x6) that secure the front bezel to the bottom
and top of the chassis.

Post-requisites

1 Replace the
2 Replace the left and right side-panels. See
3 Replace the
146
handle bars.
stability foot.
computer. After working inside your
After working inside your
"Replacing the side panels".