Security
System Password
HDD Password Status
HDD1 Password Status
HDD2 Password Status
HDD3 Password Status
Password Change
Computrace
HDD protection
Firmware TPM
UEFI Firmware Capsule Updates
password controls access to the
system setup utility.
Allows you to set the system
password. The system password
controls access to the computer at
boot.
Displays if the HDD password is
clear or set.
Default: Not set.
Displays if the HDD password is
clear or set.
Default: Not set.
Displays if the HDD password is
clear or set.
Default: Not set.
Displays if the HDD password is
clear or set.
Default: Not set.
Allows you to permit or deny system
password or HDD password
changes. Default: Permitted
Enable or disable the BIOS module
interface of the optional Computrace
Service from Absolute Software.
Allows you to set, change, or delete
the hard-disk drive password.
Default: Disabled.
Enable or disable the firmware TPM.
Default: Enabled.
Enable or disable BIOS updates
through UEFI capsule update
packages.
Default: Enabled.
189
Need help?
Do you have a question about the Area-51 R3 Threadripper Edition and is the answer not in the manual?