Replacing the right AlienFX side-
panel connector
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Route the cable through the slot on the bracket and align the screw holes on
the right AlienFX side-panel connector with the screw holes on the bracket.
2
Replace the two screws (#6-32x6) that secure the right AlienFX side-panel
connector to the bracket.
3
Align the screw hole on the right AlienFX side-panel connector assembly
with the screw hole on the chassis.
4
Replace the screw (#6-32x6) that secures the right AlienFX side-panel
connector assembly to the chassis.
5
Connect the cable that connects the right AlienFX side-panel connector to
the I/O board. See
Post-requisites
1
Replace the left and right side-panels. See
2
Replace the
"I/O-board
stability
foot.
computer. After working inside your
After working inside your
components".
"Replacing the side
panels".
53