Removing The Battery Case; Prerequisites; Procedure - Alienware Area-51 R3 Threadripper Edition Service Manual

Removing the battery case

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the right side-panel. See
3 Remove the battery.

Procedure

1 Lay the chassis on the left side.
2 Press the release tabs on the cable connector to disconnect the battery-
case cable from the I/O board.
3 Remove the two screws (#6-32x5.2) that secure the battery case to the
chassis.
stability foot.
computer. After working inside your
After working inside your
"Removing the side panels".
39