Alienware Area-51 R3 Threadripper Edition Service Manual page 55

2 Disconnect the cable that connects the left AlienFX side-panel connector to
the I/O board. See
Figure 17. Image: Left AlienFX connector removal
1 left AlienFX side-panel
connector
3 I/O board
3 Turn the chassis over.
4 Remove the AlienFX side-panel cable through the routing guides on the
chassis.
5 Remove the screw (#6-32x6) that secures the left AlienFX side-panel
connector assembly to the chassis.
"I/O-board components".
2 left AlienFX side-panel
cable
55