Maintenance - Canon LBP351 Series Service Manual

1. Open the following service mode, and confirm that the URL for accessing UGW is set correctly. If the correct URL
is not set, set it.
• SERVICE MODE > NETWORK GR.> E-RDS > RGW-ADDRESS
2. Open the following service mode, and confirm the port number used when communicating with the UGW server. If
the correct number is not set, set it.
• SERVICE MODE > NETWORK GR.> E-RDS > RGW-PORT
3. Open the following service mode, and set whether to reduce transmission costs for E-RDS data when the power is
turned ON.
• SERVICE MODE > NETWORK GR.> E-RDS > REDUCE SEND NETHOD
4. Execute the following service mode to perform a communication test with the UGW server.
• SERVICE MODE > NETWORK GR.> E-RDS > COM-TEST

Maintenance

■ Initializing E-RDS settings
It is possible to clear the FLASH data of E-RDS and change the E-RDS setting back to the default value.
● Initialization procedure
1. Press [OK] to execute the following service mode to initialize the E-RDS settings.
• NETWORK GR. > E-RDS > CLEAR
● Setting values and data to be initialized
The following E-RDS settings, internal data, and Alarm filtering information are initialized.
• SERVICE MODE > NETWORK GR. > E-RDS > E-RDS SWITCH
• SERVICE MODE > NETWORK GR. > E-RDS > RGW-PORT
• SERVICE MODE > NETWORK GR. > E-RDS > RGW-ADR
• SERVICE MODE > NETWORK GR. > E-RDS > COM-LOG
E-RDS
E-RDS SWITCH
RGW-ADDRESS
RGW-PORT
COM-TEST
E-RDS
E-RDS SWITCH
RGW-ADDRESS
RGW-PORT
COM-TEST
E-RDS
E-RDS SWITCH
RGW-ADDRESS
EGW-PORT
COM-TEST
E-RDS
RGW-PORT
COM-TEST
COM-LOG
CLEAR
91
3. Technical Explanation (System)
RGW-ADDRESS
https://a01.ugwdevice.net/u
fix : OK key
Entry Mode: a
RGW-PORT
443
(1~65535)
Execute?
No
Yes
Execute?
No
Yes