Canon LBP351 Series Service Manual page 56

3. Click [Yes] when a dialog box confirming whether you want to execute the test is display.
The Communication Test is carried out.
4. Upon the communication test completed, the communication test result screen is shown. Press [Back] button to
exit this operation.
If "NG" is displayed as the result of the test, check the network settings and server URL settings.
● Enabling UGW Link
When installing the firmware in the method of "UGW-linked Download and Update" or "UGW-linked Download", the following
should be set before actually using UGW link.
1. Set "On" for the following service mode:
• SERVICE MODE > FUNCTION GR. >MEAP > CDS-UGW
2. Access the [Customer Information] screen of the UGW WebPortal, and specify [Yes] for the following setting:
• Firmware Distribution
CAUTION:
• See "imageWARE Remote Operator's Manual / e-Maintenance Business Operation Manual" for how to operate UGW
WebPortal.
• [Distribute Firmware] should be set on [Customer Management] screen for staff in charge of setting for [Enter customer
information] or [Command for firmware distribution] in order to allow them to select the desired device on [Firmware
Distribution Information] screen.
• If [Distribute Firmware] is not shown on [Customer Management] screen of UGW WebPortal, appropriate authorities
may not be set to each account in Firmware Distribution Information. Contact the sales company's Support Department
concerned for confirmation.
49
3. Technical Explanation (System)