Function Gr - Canon LBP351 Series Service Manual

Item
CHANGE CRG WARN LV To switch display/hide of the menu for setting the toner check timing (Setup > User Maintenance > Toner
PSWD-SW
SLEEP SETTINGS
RMT-SW
Reduce Black Spots

FUNCTION GR.

* : Default Value
Item
ECONF
EXPORT
IMPORT
Import/Export Set.
IMPORT
EXPORT
SMD-EXPT
Check Timing).
• OFF, ON *
Setting of the password type used to log in to remote UI service mode
• 0: Password for service technician *
• 1: Password for service technician + system administrator
To change the display items of the sleep mode setting menu (Setup > Control Menu > Sleep Mode).
• Mode 1 (* except for EUR)
• Mode 2 (*EUR only)
ON/OFF of remote UI service mode function
• OFF *, ON
Charging failure reduction mode
Change the setting to "ON" when charging failure (black dots on blank area, or white dots on solid area and
halftone area) occurs at 1/2 speed in a low temperature environment.
Reduce charging failure by increasing the charging current.
The operation is performed when any of the following conditions are met.
1. Environment temperature: 22 deg C or less
2. Process speed: 1/2
3. Large capacity cartridge: Continuous printing of approx. 3,000 sheets or more, or intermittent printing
of approx. 1,200 sheets or more
Small capacity cartridge: Continuous printing of approx. 1,200 sheets or more, or intermittent printing
of approx. 500 sheets or more
OFF *, ON
To export the binary file of setting data.
To export the setting data to a USB flash drive.
• GENERAL
Whether to set items whose device settings do not depend on the PCB, but can be performed
commonly within the same device as the target.
• DEPEND
Whether to set items whose device settings change depending on the PCB as the target.
• SECURITY
Whether to set items related to security as the target.
• ALL
Whether to set all items exported in GENERAL/DEPEND/SECURITY as the target.
To import the setting data to a USB flash drive.
To import service mode setting values.
This function supports the following import methods.
• USB flash drive
• PC (using remote UI service mode)
To export service mode setting values.
This function supports the following export methods.
• USB flash drive
• PC (using remote UI service mode)
To set whether to export "service mode data" from remote UI.
When 1 is set, "service mode data" is displayed as the target data of export on remote UI. When
installing more than 1 machine at the same time, the same service mode data can be registered.
Remote UI > Settings/Registration: Management Settings: Import/Export > Export
Description
Description
170
9. Service Mode