Backup/Restoration Using A Function Other Than The Dcm Function - Canon LBP351 Series Service Manual

● Procedure for Importing from a PC
1. Prepare the setting information file (".dcm" file) to import.
2. Access the following service mode in the Remote UI from a PC browser, specify the file to import, enter the
encryption password, and click [Start Importing].
• SERVICE MODE > FUNCTION GR. > Import/Export Set. > IMPORT
3. When the following message is displayed after the processing is complete, click [Restart].
4. Restart this machine, enter service mode, and confirm that the setting information is reflected.
This completes the procedure for importing a setting information file.

Backup/Restoration Using a Function Other Than the DCM Function

This machine is equipped with functions other than the DCM function for migrating data to an unused Main Controller PCB when
the Main Controller PCB has failed.
Backup Method
This machine is equipped with the following backup methods other than the DCM function.
Backup Method
USB
Expansion ROM for
servicing/Sublog Board
■ Backup to/Restoration from a USB Flash Drive Using Service Mode
You can use service mode to back up settings information to a USB flash drive and restore data backed up to a USB flash drive,
without using the DCM function.
Target Data for Backup
• [Settings/Registration] menu setting values
• Service mode setting values
● Backing Up to a USB Flash Drive
This section describes the procedure for backing up to a USB flash drive.
1. Connect the USB flash drive to the USB Memory Port of this machine.
Items which can be backed up
Setting Value(USER MODE, SERVICE MODE, etc)
Setting Value(USER MODE, SERVICE MODE, etc)
Management Data (Page Counter, Main Controller service counter, Serial No.)
80
3. Technical Explanation (System)