Canon LBP351 Series Service Manual page 181

Item
E-RDS SWITCH Set use/no use of Embedded-RDS function
Default Value :
RGW-AD- To check and set the server URL. Use the "up, down, left and right keys, Job Status/Cancel key and Feeder
DRESS selection key" to enter URL, and "OK key" to determine it.
"↓" is displayed at the end of the character string. The number of characters which can be entered is 128.
The default value is the server URL.
Characters which can be set are as follows.
01233456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz!"#$%&'()*+,-./:;<=>?
@[¥]^_`{|}~
RGW-PORT To set the port number of the server.
COM-TEST To execute a communication test, and display the result.
COM-LOG To display the detail of the communication test result.
Communication with the server is attempted, and the time, error codes and error information at error oc-
currence up to the present date are displayed. Maximum of 5 logs are saved, and the latest log is displayed.
Error information is 130 byte maximum.
CLEAR To clear the schedule information, alarm error and filtering information besides the eRDS setting value in
service mode by executing this item.
CA-KEY
CLEAR To change CA certificate to the default by executing this item and turning ON and then OFF the power.
MIB CHARGECOUNT To set the range of counter information that can be obtained as MIB (Management Information Base).
WOLtrans To set recovery from sleep mode.
SLEEP ADVERTISE
SWITCH To set whether to use the sleep notification.
PORT To set the port number as the destination of sleep notification.
TTL To set the number of routers which can send sleep notification messages.
INTERVAL To set the notification interval (seconds) of sleep notification.
PROXYRES To set whether the proxy server (instead of internal network) returns proxy response to the external network.
IPSEC SETTING
IKERETRY To set the IKE retry times.
• ON: Use Embedded-RDS.
• OFF: Do not use Embedded-RDS.
• Except China model : On*/Off
• China model : On/Off*
CAUTION:
If "ugwdevice.net/" is not included in the character string when entering an URL, it is judged as
an authentication error and an error message is displayed.
• 443*
• ALL ACCESS: All charge counters are obtained (*default)
• DISP ACCESS: Only displayed counter is obtained
• NON ACCESS: All charge counters are not obtained
• 1: Recover from sleep by WSD, and do not recover from sleep by the old utility using the broadcast
packet. (*default)
• 2: Recover from sleep by WSD, and do not have the function to recover from sleep by the old utility
using the SNMP search broadcast packet.
• 3. Enable recovery from sleep by the old utility, and do not recover from sleep by WSD.
CAUTION:
[Description of terminology]
WSD (Web services on devices): A protocol to easily set up connection and use of various
devices connected to the network
• ON: Notify sleep. (*default)
• OFF: Do not notify sleep.
• Setting value: 1 to 65535 (*Default value: 11427)
• Setting value: 0 to 254 (*Default value: 3)
• Setting value: 60 to 65535 (*Default value: 600)
• ON: Perform proxy response. (*Default)
• OFF: Do not perform a proxy response.
• 0 to 3 (* Default value: 1)
Description
174
9. Service Mode