Canon LBP351 Series Service Manual page 163

Error Code Title
E004-0000 Fixing Drive As-
sembly circuit error
E004-0004 Mismatch of Fixing
Assembly type
E012-0000 Pickup Motor error Pickup Motor error (startup er-
E012-0001 Pickup Motor error Pickup Motor error (rotation
E012-0008 Main Motor error
E012-0009 Main Motor error
E014-0000 Fixing Motor error
E014-0001 Fixing Motor error
E015-0001 Cassette 1 lift-up
error
E015-0002 Cassette 2 lift-up
error
E015-0003 Cassette 3 lift-up
error
E015-0004 Cassette 4 lift-up
error
E015-0005 Cassette 5 lift-up
error
E066-0000 Environment Sen-
sor error
E100-0000 Laser Scanner er-
ror
E100-0001 Laser Scanner er-
ror
E110-0000 Scanner Motor er-
ror
E196-0001 Firmware error
E196-0002 DC Controller inter-
nal error
E196-0003 Detection of non-
compatible DC
Controller
E245-1011 Host machine
FRAM write error
Detection description
Error in either the Fixing Heat-
er or the Fixing Motor
A fixing assembly of another
product was installed.
ror)
error)
Main Motor error (startup er-
ror)
Main Motor error (rotation er-
ror)
Error in startup of the Fixing
Motor
Error in rotation of the Fixing
Motor
Cassette 1 Lifter Motor error 1. Check the Cassette 1 Lifter Motor (dropout, gear tooth jump, etc.).
Cassette 2 Lifter Motor error 1. Check the Cassette 2 Lifter Motor (dropout, gear tooth jump, etc.).
Cassette 3 Lifter Motor error 1. Check the Cassette 3 Lifter Motor (dropout, gear tooth jump, etc.).
Cassette 4 Lifter Motor error 1. Check the Cassette 4 Lifter Motor (dropout, gear tooth jump, etc.).
Cassette 5 Lifter Motor error 1. Check the Cassette 5 Lifter Motor (dropout, gear tooth jump, etc.).
Failure of the Environment
Sensor was detected.
Failure of the Laser Scanner
Unit
Failure of the Laser Assembly
in the Laser Scanner Unit
Error in the initial operation of
the Scanner Motor
Engine firmware error
The memory area in the DC
Controller cannot be ac-
cessed.
DC Controller firmware of an-
other model was detected.
Host machine FRAM write er-
ror was detected.
1. Check the drawer connector between the Fixing Assembly and
the Power Supply PCB. 2. Check the connection of the Fixing Motor.
3. Replace the Fixing Assembly. 4. Replace the Fixing Motor. 5. Re-
place the Power Supply PCB.
Replace the fixing assembly with that of this product.
1. Check the connector between the Pickup Motor and the DC Con-
troller PCB. 2. Replace the Pickup Motor. 3. Replace the DC Con-
troller PCB. 4. Replace the Pickup Drive Unit.
1. Check the connector between the Pickup Motor and the DC Con-
troller PCB. 2. Replace the Pickup Motor. 3. Replace the DC Con-
troller PCB. 4. Replace the Pickup Drive Unit.
1. Check the connector between the Main Motor and the DC Con-
troller PCB. 2. Replace the Main Motor. 3. Replace the DC Controller
PCB. 4. Replace the Main Drive Unit.
1. Check the connector between the Main Motor and the DC Con-
troller PCB. 2. Replace the Main Motor. 3. Replace the DC Controller
PCB. 4. Replace the Main Drive Unit.
1. Check the connection of the Fixing Motor. 2. Replace the Fixing
Motor. 3. Replace the DC Controller PCB.
1. Check the connection of the Fixing Motor. 2. Replace the Fixing
Motor. 3. Replace the DC Controller PCB.
2. Check the connector between the Cassette 1 Lifter Motor and the
DC Controller PCB. 3. Replace the Cassette 1 Lifter Motor. 4. Re-
place the DC Controller PCB.
2. Check the connector between the Cassette 2 Lifter Motor and the
Cassette 2 Driver PCB. 3. Replace the Cassette 2 Lifter Motor. 4.
Replace the Cassette 2 Driver PCB.
2. Check the connector between the Cassette 3 Lifter Motor and the
Cassette 3 Driver PCB. 3. Replace the Cassette 3 Lifter Motor. 4.
Replace the Cassette 3 Driver PCB.
2. Check the connector between the Cassette 4 Lifter Motor and the
Cassette 4 Driver PCB. 3. Replace the Cassette 4 Lifter Motor. 4.
Replace the Cassette 4 Driver PCB.
2. Check the connector between the Cassette 5 Lifter Motor and the
Cassette 5 Driver PCB. 3. Replace the Cassette 5 Lifter Motor. 4.
Replace the Cassette 5 Driver PCB.
1. Check the connection of the Environment Sensor. 2. Replace the
Environment Sensor. 3. Replace the DC Controller PCB.
1. Check the connector of the Laser Scanner Unit. 2. Replace the
Laser Scanner Unit. 3. Replace the DC Controller PCB.
1. Check the connector of the Laser Scanner Unit. 2. Replace the
Laser Scanner Unit. 3. Replace the DC Controller PCB.
1. Check the connector of the Laser Scanner Unit. 2. Replace the
Laser Scanner Unit. 3. Replace the DC Controller PCB.
1. Turn OFF and then ON the power. 2. Update firmware. 3. Replace
the DC Controller PCB.
1. Turn OFF and then ON the power. 2. Update firmware. 3. Replace
the DC Controller PCB.
1. Replace the DC Controller with that of this model. 2. Update firm-
ware.
1. Replace the Main Controller PCB.
156
8. Error/Jam/Alarm
Remedy