Canon LBP351 Series Service Manual page 114

Hide thumbs Also See for LBP351 Series:
Table of Contents

Advertisement

CAUTION:
If the device has been started in the MEAP SAFE mode, all MEAP applications stop and the status becomes "Installed".
This status remains unchanged even if the MEAP SAFE mode is cancelled and the device is started again in normal mode.
It is therefore necessary to access SMS after normal startup, and start the MEAP application.
■ Using USB Devices
● Two types of USB drivers
While the USB driver that can be used in iR series is only the USB driver designed exclusively for MEAP application (hereinafter
referred to as "MEAP driver"), not only MEAP driver but also USB system driver (hereinafter referred to as "system driver") can
be used in this device.
System driver and MEAP driver cannot be used together. When either of them is used, the other driver cannot be used.
In this model, the USB system driver supports only Mass Storage; HID is not supported. In other words, storage devices such as
USB Flash memory can be used via system driver, but interface devices such as USB keyboard cannot be used via system driver.
● USB driver setting
System driver is active by default in this device.
The driver can be changed in setup menu.
Usually, It is not necessary to change the setting because it is specified in the MEAP application side.
Only in the case of a special MEAP application, it is necessary to change the USB driver setting.
For details, refer to specifications of MEAP application side.
USB Storage Device : [MEAP Driver]
ON
MEAP driver (compatibility mode)
OFF (default)
Native driver
NOTE:
When any settings changes are made, the device must be restarted.
Setup
Interface
Interface Selection
Print Quality
Time Out
Interface
User Maintenance
Connection Recog.
Extended Rx Buffer
Print Mode
USB Adv. Functions
USB Storage Device
Adv. Fnc. Settings
MEAP Driver
USB Storage Device
Application that supports mass stor-
Can use USB mass storage device. Can
work only on the applications that support
the MEAP application driver.
Cannot use USB mass storage device.
(Device cannot be detected.)
Interface Selection
USB
Network
USB Adv. Functions
MEAP Driver
Off
On
age device
107
3. Technical Explanation (System)
MEAP application that supports sys-
tem driver
Cannot use USB mass storage device.
Can use USB mass storage device.

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Lp352 series

Table of Contents