Fixing System
Removing the Fixing
Assembly
■ Preparation
1. Remove the Duplex Unit.
2. Remove the Rear Cover
Cover" on page 117
■ Procedure
1. Pull out the Fixing Assembly [3] while placing your
fingers on [1] and holding the blue lever [2].
[1]
[2]
Removint the Fixing Moter
■ Preparation
1. Pull out the cassette.
2. Remove the Duplex Unit.
3. Remove the Rear
Cover."Removing the Rear Cover"
on page 117
4. Remove the Right
Cover." Removing the Right
Cover" on page 117
5. Remove the Main Controller
Main Controller PCB" on page 123
6. Remove the Controller
Controller Box" on page 124
7. Remove the DC Controller
Controller PCB" on page 125
Unit."Removing the Rear
[3]
[1]
[2]
PCB."Removing the
Box."Removing the
PCB."Removing the DC
5. Parts Replacement and Cleaning
■ Procedure
1. Remove the Harness Guide [1].
• 2 Screws [2]
• 1 Spring [3]
• 2 Bosses [4]
2x
[3]
2. Remove the Fixing Motor [1].
• 3 Screws [2]
3x
134
[2]
[4]
[1]
[2]
[4]
[2]
[2]
[2]
[1]