Faculty Test; Function Test <(6) Function Test - Canon LASER CLASS 810 Service Manual

Chapter 16

16.16.6 Faculty Test

16.16.6.1 FUNCTION TEST <(6) FUNCTION TEST>
Function test ((6) FUNCTION TEST)
Press the numeric keypad key 6 on the test mode menu to select the function test.
Press numeric keypad keys 1 and 3 to 9 during the function test to enter the menus listed below.
Keypad
1
2
3
4
5
6
7
8
9
G3 signal transmission test (6-1: G3 480 bps Tx)
Press numeric keypad key 1 on the FUNCTION TEST menu to select the G3 signal transmission test. This test transmits 4800-bps G3 signals from the telephone
line connection terminal and speaker.
Sensor test (6-3: SENSOR)
This mode is used to verify the status of the unit sensors from the touch panel (LCD) indications. Press numeric keypad key 3 on the FUNCTION TEST menu to
select the sensor test. The touch panel (LCD) indications change as the associated sensors turn on and off.
16-46
Left/right arrow key Transmission speed
2400bps
4800bps
7200bps
9600bps
< 12000bps
14400bps
16800bps
19200bps
21600bps
> 24000bps
26400bps
28800bps
31200bps
33600bps
Item
G3 signal transmission test
Not used
Sensor test
ADF test
Not used
Speaker test
Not used
Lamp test
Line signal reception test
T-16-26
Explanation
Transmits 4800-bps G3 signals to a telephone line and
speaker.
Sensor actuation test
ADF operation test
Speaker operation test
Contact sensor illumination test
NCU board signal sensor and frequency counter operation test
0017-7809