Properties Of A Calendar Object - Mitsubishi Electric MELSEC iQ-R User Manual

Properties of a Calendar object

Property name
PresentValue
DateList
Properties of a Schedule object
Property name
PresentValue
WeeklySchedule
ExceptionSchedule
Reliability
Schedule_Default
OutOfService
Properties of a TrendLog object
Property name
LogDeviceObjectProperty
LogInterval
BufferSize
LogEnable(Enable)
LogBuffer
StopWhenFull
RecordCount
TotalRecordCount
Properties of a NotificationClass object
Property name
RecipientList
Properties of a Device object
Property name
SystemStatus
LocalDate
LocalTime
ObjectList
Description
When the current date is listed in a calendar (DateList property), the value will be True.
A list of date is registered.
Description
The control status of recently executed schedule is represented.
Regular schedules for each day of week from Mondays to Sundays are stored.
Specify an exceptional schedule.
On the date specified to an ExceptionSchedule property, the schedule is performed not with the scheduled operation
specified to a WeeklySchedule property but with an ExceptionSchedule property.
Whether or not an inconsistency exists in the set schedule is represented.
When a Reliability property value is other than NoFaultDetected, it indicates that the set schedule contains an error.
If neither a WeeklySchedule property nor ExceptionSchedule property are set when the date is changed (0:00), the
scheduled operation set to this property is executed at 0:00.
When an OutOfService property value is True, all the scheduled operations set to each object are disabled.
Description
Specify a logging target object and its property.
Specify a logging cycle. (Unit: 10 milliseconds)
Specify the number of records to be sampled.
To start logging, select True.
To stop logging, select False.
Logged data is stored. The data can be read using a ReadRange service.
Select whether to stop logging or continue logging by overwriting old records when the number of records specified to
a BufferSize property is sampled by a LogBuffer property.
When the value is True, logging is stopped.
When the value is False, logging is continued by overwriting the oldest record.
The number of records stored to a LogBuffer property is stored.
The total number of records stored to a LogBuffer property is stored.
Description
Specify the send destination of an Event notification. Specify a destination to a BACnetAddress or DeviceID.
Description
The status of a BACnet module is represented.
When joining a BACnet, the value is Operational.
When leaving a BACnet, the value is NonOperational.
The current date of a BACnet module is stored.
The current time of a BACnet module is stored.
A list of all the objects registered in a BACnet module is stored.
Appendix 3 Details of BACnet Properties
A
APPX
269