Mitsubishi Electric MELSEC iQ-R User Manual page 159

Creation of a program
Create a program that reads Event notification data from the access block for Event interaction assigned to the buffer
memory.
■ Values to be stored to an access block for Event interaction
Offset Name
(Decimal address)
+0 STATUS
(700)
+1 EventType/Priority
(701)
+2 to +5 ProcessID
(702 to 705)
For details on the format of access blocks for Event interaction, refer to the following section.
Page 295 Format of access blocks for Event interaction
■ Devices to be used
Device name
Data register
Buffer memory
■ Program example
(0) When the CONTROL (b15) of a Status is '1' (Event notification reception complete), the Status of an access block for Event interaction is stored to
D500.
The EventType/Priority of the access block for Event interaction is stored to D501.
The ProcessID of the access block for Event interaction is stored to D502 to D505.
'0' (idling) is stored to the CONTROL (b15) to reset.
Device
D500
D501
D502 to D504
U0\G700
U0\G700.F
U0\G701
U0\G702
Value to be set
 (No settings)
 (No settings)
 (No settings)
Description
A device for storing the Status of an access block for Event interaction
A device for storing the EventType/Priority of an access block for Event
interaction
Devices for storing the Process ID of an access block for Event interaction
For details, refer to the following section.
Page 157 Values to be stored to an access block for Event interaction
1.8 Event Interaction Function
1
1 FUNCTIONS
157