Event Interaction Function - Mitsubishi Electric MELSEC iQ-R User Manual

1.8

Event Interaction Function

This function receives Event notifications from a BACnet module or another BACnet device.
After receiving an Event notification
Read Event notification data from the access block for Event interaction assigned to the buffer memory using a program.
*1 ConfirmedEventNotification service or UnconfirmedEventNotification service
*2 The data of an Event notification is as follows:
EventState property value
StatusFlags property value (When the StatusFlags property is included in the packet by the Event notification send source BACnet
device.)
• By creating a program using received Event notification data, the control linked with the Event notification
can be performed.
• For the method to send an Event notification from a BACnet module, refer to the following manual.
Page 180 Event notification send setting
How to use the Event interaction function
Operating procedure
1.
Select [Maintenance]  [Pause/Restart], and click the [Pause] button on the "Pause/Restart" screen.
2.
Select [Settings]  [Event Interaction], and click the [Add] button.
1 FUNCTIONS
152
1.8 Event Interaction Function
*1
, the BACnet module outputs the Event notification data
*2
to the buffer memory.