Mitsubishi Electric MELSEC iQ-R User Manual page 91

Bacnet module
Hide thumbs Also See for MELSEC iQ-R:
Table of Contents

Advertisement

BACnet module
■ Operation at startup
At the startup of a BACnet module, the module writes values, which are saved in the internal memory before powering OFF
(or resetting) the module, to the STATUS in the buffer memory.
■ Cyclic operation
A BACnet module periodically
internal memory.
*1 For the reading cycle, refer to the following section.
Page 264 Loading buffer memory
START
Read the CONTROL
Set the OutOfService property
OutOfServicie=1
NO
Reliability=0
YES
Set the read 32-bit integer value to
the PresentValue property
Set NoFaultDetected to
the Reliability property
Set the read value to the following property
・Contract_Reciving_Power
・Target_Value_Of_Power
・Start_Time_Of_Monitoring
・Estimated_Power
・Adjust_Power
・Elapsed_Time
・Time_Width_Of_WH_Trend
・Consumed_WH_In_This_Term
・Consumed_WH_In_Last_Term
END
*1 When '1' is set to "OutOfServiceControl" in [Settings]  [Basic Information]  [BACnet Detail Setting] button  "Interface", the value of an OutOfService
property is stored. (Page 281 Interface)
*1
reads a CONTROL in the buffer memory and applies the following processing result to the
*1
YES
NO
Set the read value to
the Reliability property
1 FUNCTIONS
1.1 BACnet Object Function
1
89

Advertisement

Table of Contents
loading

Table of Contents